Idemia communication – Courbevoie – April 10th, 2020
As we all manage the difficult challenges arising from the Coronavirus (COVID-19) pandemic, please be reassured that IDEMIA is continuously monitoring the situation and is ready to assist whenever needed. In this document, you will find disinfection and sanitizing recommendations applicable to the following list of IDEMIA’s devices :
Access control and time management biometric terminals: SIGMA Family, MorphoAccess VP, MorphoWave Compact, VisionPass
Mobile device : MorphoTablet
Overview
IDEMIA recommends the following steps to limit the spread of COVID-19 when using biometric devices. They are based on the information made available by the World Health Organization (WHO) and other governmental health and safety organizations. As IDEMIA has not specifically tested these steps on Coronavirus (COVID-19), we can however not warrant their effectiveness
Use Best Practices for Hand Sanitation of Users
Instruct users to thoroughly clean their fingers and hands with an alcohol-based rub, or wash with soap and water BEFORE and AFTER touching the device
Ensure that the fingers and hands are completely dry before touching the device
Use Personal Protective Equipment when Touching the Hands of a User (during enrollment or verification phase for instance)
Follow your local Health Agency protocols for the use of Personal Protective Equipment (PPE) when touching the hands of individuals that need to be enrolled/verified
Review WHO recommendations[1] on the use of PPE for your setting, personnel, and activity
The WHO may recommend additional PPE (gloves and mask) when interacting with individuals exhibiting symptoms suggestive of COVID-19
Cleaning and Disinfecting the Biometric Device itself
First, please note that it is NOT necessary to unplug the device to clean it
Thoroughly clean your hands with an alcohol-based rub or wash with soap and water BEFORE and AFTER cleaning the biometric device
Always use a new pair of gloves when cleaning the device, and immediately dispose of the gloves once finished
Regularly clean and disinfect the fingerprint sensor, especially after someone exhibiting COVID-19 symptoms touches the device
From the US Environmental Protection Agency list[2] of disinfectants for use against the Coronavirus, IDEMIA recommends either:
Windex® Multi-Surface Disinfectant or another similar product containing L-Lactic acid; or
Hydrogen peroxide : apply the disinfectant to a non-abrasive wipe. IDEMIA recommends either:
Economizer® Wipers; or
3M Scotch-Brite® High Performance Cloth
Wipe the device surface and leave the surface wet with disinfectant for at least 5 minutes
Important!
Do not apply products containing bleach to the fingerprint sensor. This may permanently damage and affect the performance of the device
Do not use abrasive cloths or wipes (e.g., paper towels)
Do not spray liquid directly onto the sensor. Always spray cleaning solution onto a non-abrasive cloth, and then use it to wipe the sensor
It was in an unusual and strange context that IDEMIA was pushed to introduce its latest biometric reader for its frictionless access control division, the VisionPass.
Indeed, this new face reader was supposed to be introduced during the international Las Vegas show ISC WEST initially scheduled March 17 -20th. This show was unfortunately postponed next June due to the health crisis of COVID-19 the whole world is currently facing.
That being said, let’s focus on the new benchmark for contactless biometrics market based on facial recognition. The VisionPass aims at replacing the 3D Face Reader, very well known by a lot of users since it was the precursor of facial recognition based on 3D and not 2D as most of the existing readers on the market at the time.
VisionPass brings us to the next level since it is based on a combination of 3D, 2D and infrared facial recognition but above all it is equipped with artificial intelligence just like the MorphoWave Compact, which allows it to achieve very high performance.
It naturally inherits of all the know-how of the world leader in biometrics IDEMIA with its manufacturing skills and exceptional technical characteristics. Being IP65 (fully protected against dust. Protected against water jets from all directions with the lance) and IK08 (Resistance to an impact of 5 joules. Equivalent to the impact of a mass of 1.7 kg falling from a 3 meters high), it can be easily deployed both indoor and outdoor and resist all types of environments.
This access control device reflects many qualities, wide angle capture, support face angles and face changes, near-motion 1-second verification whatever the light conditions, up to 40,000 users, high throughput, completely hands-free, anti-fraud systems, etc … and much more.
Do not hesitate to contact Biotime teams for further information about the new VisionPass.
/wp-content/uploads/2024/06/Logo-BT_202406.png00biotime/wp-content/uploads/2024/06/Logo-BT_202406.pngbiotime2020-03-28 15:56:142022-08-16 15:23:56Experience the VisionPass, brand new frictionless biometric reader by IDEMIA
New partnership between Idemia and Japan Aerospace Corporation(JAC) at Level5 stadium, Fukuoka, Japan. The stadium will do a trial for MorphoWaveCompact, the best contactless / frictionless biometric device in the market. With a simple gesture – wave of hand – the biometric terminal can scan 4 fingerprints using an optical technology enhanced by Artificial Intelligence.
Presented in 2019 on a final match of J2 league, the MorphoWave Compact, MWC, caught attention of Japanese authorities and proof of concept took place involving two scenario:
Ticketless admissions for pre-registered customers
Age verification for drinks and food collection at counter
“Our goal is to enable frictionless access everywhere without compromising security,” said Nobuyoshi Nezu, Managing Director and Vice President of Sales for Idemia Japan in a prepared statement. “IDEMIA has developed MorphoWave Compact, a touchless fingerprint device that enables this, by combining a high level of biometric security with a unique user experience, convenience and speed, which is what environments like a stadium need. We are excited to partner with Japan Aerospace Corporation on this very promising case and look forward to a full rollout of our MorphoWave devices at Level5 Stadium.”
Powered by AI capabilities, the MWC has better performance on matching, storing and responding back a command, by consequence it increases the user experience, so aimed at big-ticket events as sports games.
/wp-content/uploads/2024/06/Logo-BT_202406.png00biotime/wp-content/uploads/2024/06/Logo-BT_202406.pngbiotime2020-03-06 16:05:252022-08-16 15:23:30Japanese Stadium to be equipped with IDEMIA’s contactless biometric solution
You are equipped with our biometric readers or sensors, you use our software or you are interested in one of our products? Visit LinkedIn to find out more about our news, novelties and services!
Even though you have a high-quality biometric reader, robust and so, it’s always better to protect the device in order to extend its life to its maximum.
This is the reason why we have designed customized protection for each one of our biometric readers.
All these readers can be supplied with a stainless protection of high quality, made in France.
In our accessories’ range, there’s also spacers (Sigma Lite, Morphowave Compact), its use allows a clean and more professional environment by hiding reader’s cables.
In addition, it exists for MorphoWave Compact a stainless pedestal, designed specially to receive the contactless device and convert it into a tower. This improve the user experience whilst using the device because of its ergonomic height.
At last, for demonstrations and showrooms, or simply to enroll staff in your office, the MorphoTablet and the Sigma Lite can be fixed onto a desk support/docking station.
/wp-content/uploads/2024/06/Logo-BT_202406.png00biotime/wp-content/uploads/2024/06/Logo-BT_202406.pngbiotime2020-01-29 11:05:442020-01-31 15:43:43Customized protections and accessories for all Idemia’s biometric terminals!
Ce site utilise des cookies. Les cookies garantissent une expérience de navigation optimale. Vous pouvez modifier les réglages des cookies pour ce site.
Ce site utilise des cookies afin de garantir la meilleure expérience utilisateur possible.
Vous pouvez ajuster tous les paramètres de vos cookies en naviguant dans les onglets à gauche.
Cookies web nécessaires
Ces cookies sont strictement nécessaires pour vous fournir des services disponibles sur notre site Web et d'utiliser certaines de ses fonctionnalités.
Puisque ces cookies sont strictement nécessaires pour livrer le site, vous ne pouvez pas les refuser sans impact sur la façon dont notre site fonctionne. Vous pouvez les bloquer ou les supprimer en changeant les paramètres de votre navigateur et forcer le blocage de tous les cookies sur ce site.
Cookies Google Analytics
Les cookies Google Analytics sont utilisés pour nous aider à comprendre comment notre site est utilisé et pour nous aider à l'améliorer afin de vous proposer la meilleure navigation possible.
Si vous ne voulez pas que nous suivions votre visite à notre site, vous pouvez désactiver le suivi dans votre navigateur ici :
Autres services externes
Nous utilisons également différents services externes tels que Google WebFonts, Google Maps et les fournisseurs de vidéo externes. Comme ces fournisseurs peuvent collecter des données personnelles comme votre adresse IP, nous vous permettons de les bloquer ici. Veuillez prendre note que cela pourrait fortement réduire la fonctionnalité et l'apparence de notre site. Les modifications prendront effet une fois que vous rechargerez la page.
Paramètres Google webfont :
Paramètres Google Map :
Vimeo et YouTube Video Embeds :
Politique de confidentialité
Vous pouvez lire plus sur nos cookies et les paramètres de confidentialité en détail sur notre page "Legal notices".
+1 (430) 999-3121 
+33 (0)4 82 82 97 97 
Coronavirus (COVID-19) situation -Disinfection and sanitizing recommendations applicable to IDEMIA Biometric Devices
Biometrics, UncategorizedIdemia communication – Courbevoie – April 10th, 2020
As we all manage the difficult challenges arising from the Coronavirus (COVID-19)
pandemic, please be reassured that IDEMIA is continuously monitoring the situation
and is ready to assist whenever needed.
In this document, you will find disinfection and sanitizing recommendations applicable
to the following list of IDEMIA’s devices :
FingerVP
TP5300
MorphoAccess VP, MorphoWave Compact, VisionPass
Overview
IDEMIA recommends the following steps to limit the spread of COVID-19 when using
biometric devices. They are based on the information made available by the World
Health Organization (WHO) and other governmental health and safety organizations.
As IDEMIA has not specifically tested these steps on Coronavirus (COVID-19), we can
however not warrant their effectiveness
Use Best Practices for Hand Sanitation of Users
rub, or wash with soap and water BEFORE and AFTER touching the device
device
Use Personal Protective Equipment when Touching the Hands of a User (during
enrollment or verification phase for instance)
Equipment (PPE) when touching the hands of individuals that need to be
enrolled/verified
and activity
with individuals exhibiting symptoms suggestive of COVID-19
Cleaning and Disinfecting the Biometric Device itself
water BEFORE and AFTER cleaning the biometric device
dispose of the gloves once finished
exhibiting COVID-19 symptoms touches the device
against the Coronavirus, IDEMIA recommends either:
L-Lactic acid; or
IDEMIA recommends either:
least 5 minutes
Important!
permanently damage and affect the performance of the device
non-abrasive cloth, and then use it to wipe the sensor
[1] https://apps.who.int/iris/bitstream/handle/10665/331215/WHO-2019-nCov-IPCPPE_use-2020.1-eng.pdf[2] https://www.epa.gov/pesticide-registration/list-n-disinfectants-use-against-sars-cov-2
Experience the VisionPass, brand new frictionless biometric reader by IDEMIA
BiometricsIt was in an unusual and strange context that IDEMIA was pushed to introduce its latest biometric reader for its frictionless access control division, the VisionPass.
Indeed, this new face reader was supposed to be introduced during the international Las Vegas show ISC WEST initially scheduled March 17 -20th. This show was unfortunately postponed next June due to the health crisis of COVID-19 the whole world is currently facing.
That being said, let’s focus on the new benchmark for contactless biometrics market based on facial recognition. The VisionPass aims at replacing the 3D Face Reader, very well known by a lot of users since it was the precursor of facial recognition based on 3D and not 2D as most of the existing readers on the market at the time.
VisionPass brings us to the next level since it is based on a combination of 3D, 2D and infrared facial recognition but above all it is equipped with artificial intelligence just like the MorphoWave Compact, which allows it to achieve very high performance.
It naturally inherits of all the know-how of the world leader in biometrics IDEMIA with its manufacturing skills and exceptional technical characteristics. Being IP65 (fully protected against dust. Protected against water jets from all directions with the lance) and IK08 (Resistance to an impact of 5 joules. Equivalent to the impact of a mass of 1.7 kg falling from a 3 meters high), it can be easily deployed both indoor and outdoor and resist all types of environments.
This access control device reflects many qualities, wide angle capture, support face angles and face changes, near-motion 1-second verification whatever the light conditions, up to 40,000 users, high throughput, completely hands-free, anti-fraud systems, etc … and much more.
Do not hesitate to contact Biotime teams for further information about the new VisionPass.
Japanese Stadium to be equipped with IDEMIA’s contactless biometric solution
BiometricsNew partnership between Idemia and Japan Aerospace Corporation (JAC) at Level5 stadium, Fukuoka, Japan. The stadium will do a trial for MorphoWave Compact, the best contactless / frictionless biometric device in the market. With a simple gesture – wave of hand – the biometric terminal can scan 4 fingerprints using an optical technology enhanced by Artificial Intelligence.
Presented in 2019 on a final match of J2 league, the MorphoWave Compact, MWC, caught attention of Japanese authorities and proof of concept took place involving two scenario:
“Our goal is to enable frictionless access everywhere without compromising security,” said Nobuyoshi Nezu, Managing Director and Vice President of Sales for Idemia Japan in a prepared statement. “IDEMIA has developed MorphoWave Compact, a touchless fingerprint device that enables this, by combining a high level of biometric security with a unique user experience, convenience and speed, which is what environments like a stadium need. We are excited to partner with Japan Aerospace Corporation on this very promising case and look forward to a full rollout of our MorphoWave devices at Level5 Stadium.”
Powered by AI capabilities, the MWC has better performance on matching, storing and responding back a command, by consequence it increases the user experience, so aimed at big-ticket events as sports games.
Source: https://www.biometricupdate.com/202003/idemia-successfully-pilots-contactless-biometric-access-technology-at-stadium-in-japan
Follow Biotime Technology on Linkedin !
Company, UncategorizedYou are equipped with our biometric readers or sensors, you use our software or you are interested in one of our products? Visit LinkedIn to find out more about our news, novelties and services!
Follow us on Linkedin !
Customized protections and accessories for all Idemia’s biometric terminals!
UncategorizedEven though you have a high-quality biometric reader, robust and so, it’s always better to protect the device in order to extend its life to its maximum.
This is the reason why we have designed customized protection for each one of our biometric readers.
All these readers can be supplied with a stainless protection of high quality, made in France.
In our accessories’ range, there’s also spacers (Sigma Lite, Morphowave Compact), its use allows a clean and more professional environment by hiding reader’s cables.
In addition, it exists for MorphoWave Compact a stainless pedestal, designed specially to receive the contactless device and convert it into a tower. This improve the user experience whilst using the device because of its ergonomic height.
At last, for demonstrations and showrooms, or simply to enroll staff in your office, the MorphoTablet and the Sigma Lite can be fixed onto a desk support/docking station.